Aluminum 5083 1030 3003 6061 6063 Extrusion Part Sanodized PV Bracket Accessories
1,Description:
Aging Treatments
When extruded profiles need to enhance their mechanical properties, the 6000 series alloys must be aged. How much the mechanical properties can be enhanced depends on the type of alloy and the conditions of the aging process, which range from natural aging at room temperature to various higher temperature heat treatments known as artificial aging.
As far as the strength of 6000 series alloys is concerned, the direct correlation is that the material is deformed in the process, for the internal particles to move the impedance of the ability to move, when the material is given to the stress of the particles will begin to dislocate and move, and when the stress increases again and again, the number of such particles to move will be increased and intensely enhanced, and until the material is damaged to terminate the ability of the particles to move to the magnesium siliconization grains to stop.The ability of the particles to shift is prevented by the magnesium silicide grains, so that the strength of the material can be increased. The size and density of these magnesium silicide grains are controlled by aging conditions. A small number of small, fine magnesium silicide beta double coarse crystals can slightly prevent shifting from occurring in the material, but when the number is increased, it can be enough to inhibit shifting and thus increase the strength of the material, if the grains grow too large (to become magnesium silicate beta primaries and beta crystals).Then due to the limited total amount of available magnesium and silicon will lead to a reduction in its number, due to the reduction of magnesium silicide grains caused by the shuttle space to increase the misalignment will be more likely to occur, the strength of the material will be reduced as a result.
2,Applications:
Mechanical Properties
Mechanical property requirements also impose some constraints on the extrusion process.It is defined by the extrusion speed and the temperature of the aluminum blank, which increases the correlation between the mechanical property and the process variables, and at the same time combines the surface quality of the finished product, the extrusion pressure, and other related factors.
In addition, a green demarcation curve is added to represent the demarcation line where the mechanical properties of the extruded products are suitable for the requirements. When aluminum blanks containing coarse magnesium silicide grains are used or when thicker profiles are extruded, and when mechanical properties are required to be higher, this demarcation curve will be shifted to the right, which means that the extrusion speed and the temperature of the blanks have to be increased in order to achieve the products with high requirements for the mechanical properties.Because the purpose of increasing the extrusion speed and preform temperature is to provide more heat energy to induce greater melting of the magnesium silicide in the preform.
When the aluminum embryo contains magnesium silicide beta double primary crystals and beta primary crystals of these fine grains extruded profile section thickness is thin, the mechanical properties of the requirements of the low, then the demarcation curve will be shifted to the left, manipulation of the extrusion speed opinion of the aluminum embryo temperature of the requirements of the two will be reduced, the finished product is also easy to achieve the mechanical properties.
Engine support: Supports the engine to reduce vibration and noise.
3,Specifications:
| Product | Aluminium Extrusion Parts |
| Material | AL2024, AL5052, AL6061, AL6063, AL7050, and AL7075 |
| Color | Green, Grey, Black, White, (RAL series)etc. |
| Surface treatment | Mill finish, anodized, electrophoretic coating, powder coating, thermal break, wood grain/wood-in-shift, etc. |
| Lead Time | 1-2 weeks for sample,2-5 weeks for bulk order |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Impurity | Al |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | 0.1 | 0.1 | 0.15 | Rest |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | 0.15 | Rest |
| 6060 | 0.3-0.6 | 0.1-0.3 | 0.1 | 0.1 | 0.35-0.6 | - | 0.15 | 0.1 | 0.15 | Rest |
| 6005 | 0.6-0.9 | 0.35 | 0.1 | 0.1 | 0.40-0.6 | 0.1 | 0.1 | 0.1 | 0.15 | Rest |
4,Feature Advantage:
The versatility of aluminum extrusions supports the fast-paced innovation inherent in the electronics industry. It is suitable for cost-effective solutions with consistent quality parts prototyping and mass production.
Examples of aluminum extrusion applications in the electronics industry:
CPU and GPU heat sinks
Electronic equipment housing
LED panel frame
Server and network equipment rack
Power supply housing
Electronic instrument case
Cooling body for high power electronic devices
Rails for mounting electronic components
Robot structural component
Borders for monitors and displays
5,About us
|
|
Aluminum 5083 1030 3003 6061 6063 Extrusion Part Sanodized PV Bracket Accessories Images
|
